Home > Titanium Channel >

Annealing Titanium Channel ASTM F67 Metal U Section

Product Categories

Titanium Tube [38]
Titanium Angle [33]
Titanium Channel [11]
Titanium Screw [41]
Titanium Plate [36]
Titanium Beam [10]
Titanium Bars [41]
Titanium Fittings [21]
Titanium Flange [12]
Titanium Pipe [14]
Titanium Cup [8]
Titanium Anode [10]

XI'AN FENGHUIHE INTERNATIONAL TRADE CO.,LTD.

Contact Now

Annealing Titanium Channel ASTM F67 Metal U Section

Brand Name : FHH

Place of Origin : Xi'an,China

MOQ : 200kgs

Payment Terms : L/C, D/P, T/T

Supply Ability : 100mt per month

Delivery Time : 10--20days

Packaging Details : All goods are packed by seaworth shipment materials or required by buyer

Commodity : Titanium Channel

Materials : Titanium metal / alloy

Grade : Gr1,Gr2,Gr3,Gr4,Gr5,Gr6,Gr7,Gr10

Technology : Forging, tying, annealing, machining,Cold rolling, hot rolling

Standards : ASTM F67,AMS4928,ASTM F136,ASTM B348，BT1-0,TP270,TP550,TP450 etc.

Surface : bright,smooth,clean

Contact Now

Study on straightening process of U profile of extruded TC4 titanium alloy

The effects of straightening heating temperature and cooling rate on straightening deformation, microstructure and properties of U profile were studied. The results show that under the same cooling rate, the straightening deformation effect of U profile is good with the straightening temperature increasing. At the same heating temperature, with the decrease of cooling rate, the resilience after high temperature straightening deformation is smaller, and the straightening deformation effect of U profile is better. When the straightening heating temperature is 720℃ and the cooling rate is 30℃/min, the straightening U profile meets the relevant requirements of AMS2245 "Dimensional Tolerance of Titanium and titanium alloy extrusion bars, bars and profiles"; The straightening heating temperature is not higher than 720℃, and the straightening process does not change its structure and properties.

Titanium alloys have been widely used in aviation industry and aerospace technology because of their high specific strength, heat resistance and corrosion resistance. The advantages of using the hot extrusion process to produce titanium alloy profiles are that the hot extrusion method makes the deformed metal have the best three-way compressive stress state, so that higher quality products can be obtained. When the hot extrusion process is used, because the preparation of the mold is relatively simple, the flexibility of replacing the variety is greatly improved, which also improves the economy of the product.

Use:Titanium metal and alloy have good heat resistance, low temperature toughness and fracture toughness, so it is often used as aircraft engine parts and rocket and missile structural parts. Titanium alloys can also be used as fuel and oxidizer storage tanks and high-pressure vessels. It has been used to make automatic rifles, mortar mounts and recoilless gun tubes.

Titanium Channel

No.	Production name	Specification(mm)	Length(mm)	About Kgs per piece	remark
1	5# channel	50X38X4.5	L=6000	18.74	Equal sides
2	6.3# channel	63X40X4.8	L=6000	22.86	Equal sides
3	8# channel	80X43X5	L=6000	27.73	Equal sides
4	10# channel	100X48X5.3	L=6000	34.49	Equal sides
5	12# channel	120X53X5.5	L=6000	41.56	Equal sides

materials		Gr1,Gr2,Gr3,Gr4,Gr5........
Standards:		GB/T706-2016,GB/T37520-2019,GB/T41750-2022,N/HL 001-2021,N/HL 002-2021,ASTM F67,AMS4928,ASTM F136,ASTM B348,BT1-0,TP270,TP550,TP450 etc.

Product Tags:

Annealing Titanium Channel ASTM F67 Metal U Section Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	XI'AN FENGHUIHE INTERNATIONAL TRADE CO.,LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!